Table of Contents
Advertisement
Reference topics
Control menu
Command
Raise
Lower
Select Set
point
Select Output
Control to
Manual
Control to
Automatic
Control to
Normal
Enable/Disable Toggles the state of the selected object.
Action menu
Command
Acknowledge Acknowledges an alarm.
Silence
Request
Report
Load Recipe
Print
Page Setup... Displays the Page Setup dialog box where you can specify such things as page
Print...
Print
Preview...
Honeywell 2017
Description
These commands are used together to raise or lower the SP (set point) or OP
(output) of the point associated with the selected object.
See Controlling points on page 94.
Sets the selected object to manual control mode.
Sets the selected object to automatic control mode.
Sets the selected object to normal control mode.
Description
Silences an alarm.
Generates the requested report. See Requesting a report on page 298.
Loads the specified recipe. See Loading recipes on page 288.
Prints the current display to the Windows default printer on the Station computer.
size and orientation for the printing of the current display.
Displays the Print dialog box where you can specify print options for the
Windows printer/s on the Station computer.
Displays a preview what you want to print.
306
Advertisement
Table of Contents
