Using faceplates
Command
Lower
Fast Raise
Fast Lower
For some faceplate types, if no element is selected in the faceplate and you issue one of these
commands, a "Point not selected" message appears in the message zone.
This behavior does not vary based on the auto-selection configuration.
Basic layout of a faceplate
The following figure shows how a typical faceplate is divided into four major zones:
Description Zone. Shows the point ID, description and status.
n
Indicator Zone. Shows PV, set point and related information.
n
Alarm Zone. Shows the most recent, highest priority, unacknowledged alarm.
n
Control Zone. Contains the buttons and boxes you use to control the point.
n
The basic layout of a faceplate
Description Zone
Indicator Zone
Alarm Zone
Control Zone
Indicator Zone of a faceplate
The Indicator Zone shows field values and, if appropriate, control settings such as the set
Honeywell 2017
OEP/IKB keyboard
LOWER key
FAST RAISE key
FAST LOWER key
PC keyboard
F10
65