Honeywell Experion LX Operator's Manual page 314

Reference topics
To:
Select the object that has focus
Select the OP of the selected object
Select the SP of the selected object
Set the mode of the selected point to automatic
Set the mode of the selected point to manual
Set the mode of the selected point to normal
Change the update rate for the display elements that are set to Allow fast update
in the current display (or faceplate) from Normal to Fast, or from Fast to Normal.
(The LED is illuminated when the update rate is set to Fast.)
Note that in a SafeView multi-window environment, fast update applies to all
displays.
In multi-window displays, you can also set fast update by clicking on the arrow
button provided on the title bar. When the fast update rate is set in multi-window
displays, the arrow on the title bar will animate.
Clear an incorrect operator entry
Unsupported keys
By default, the following keys are not used by Experion, so if you press any of these keys, a
'Pushbutton not implemented' message appears. (Check with your supervisor or an
experienced colleague in case they have been assigned special functions at your site.)
ALM ANNC
n
BATCH
n
CANCL PRINT
n
GO TO
n
PRINT TREND
n
RECRD
n
UNIT ASGN
n
Honeywell 2017
Press
SELECT or
BACKSPACE
OUT
SP
AUTO
MAN
NORM
FAST
CLR ENTR
314