Honeywell Experion LX Operator's Manual page 234

Displaying detailed process information
Tip:
The status counts at the top of the SCADA Controllers display are not updated
when filtering is applied – they continue to provide an overview of the status
situation.
From the SCADA Controllers display you can view status information for channels and
controllers, enable and disable controllers, and use filters to list controllers according to their
status and/or location. You can also sort controllers by their name (default) or number.
The SCADA Controllers display contains a table with the following columns:
Column Description
Check boxes provide users with the appropriate scope of responsibility and security
Enable level with the ability to enable or disable controllers. Controllers with dual links
have two check boxes, and the ability to enable or disable one or both.
The name of the controller. By default, this column is used to sort the controller list.
Name
Click a controller name to navigate to the Controller Detail display for that
controller.
Icons and text to indicate the status of the controller. Controllers with dual links
display icons for both links, and a text aggregate of the two values. For example, a
combination one disabled link and one enabled link will have a text value of
Marginal.
Possible status values are OK, Marginal, Failed, Unknown.
Status
Should a remote server become disconnected or disabled, its channels and
controllers will have a status value of Unknown.
Should a Console Station become disconnected, the servers and channels in the
filtering pane lose their status and the controller table is emptied.
Description Any descriptive text about the controller.
The number of the controller on its local server. This column can be used to sort the
Number
controller list.
The name of the local server hosting this controller, and an icon to indicate its
Server
current status.
The name and status of the channel for this controller. Channels with dual links
display status icons for both links.
Channel
Click a channel name to navigate to the Channel Detail display for that channel.
Honeywell 2017 234