Table of Contents
Advertisement
Responding to events
To call up the Event Archiving Operations display
1. Choose ViewEventsEvent Archiving.
2. You can now:
a. Archive the events by clicking the Archive Now button.
b. Check for tampering of event records.
c. Restore archived events by clicking the Restore button.
d. Remove restored archives by clicking the Remove button. The Remove button
appears when you have restored archives.
e. View the status of events collection and archiving.
Event collection and archive status
The Event Archiving Operations display shows the current event collection and archiving
status, as described in the following table.
Status
Event Archiving
status
Current event
rate
Last archived
Next archive
scheduled for
The following table describes each possible archive status.
Archive status Description
OK
Overload
Failed
Full Disk
Archiving events
Use the following procedure if:
Honeywell 2017
Description
Shows the current status of events collection and archiving. For a description
of each status see the table below.
Hourly average calculated on the previous 24 hours. Is updated every hour.
The last date and time that an archive ran.
The date and time of the next schedule archive. Calculated using the last
archive date and time and the configured schedule.
Event Archiving is working normally.
Events are occurring so frequently that Event Archiving is not able to capture
them in a timely way. If you see this status, refer the problem to your supervisor.
Events collection has failed.
There is not enough disk space to continue events collection. Events collection is
stopped until there is sufficient disk space available.
173
Advertisement
Table of Contents
