Table of Contents
Advertisement
Creating a batch or procedure
a. Activities, which will display the generic version of the display showing a com-
bination of batches and procedures
b. Batches, which will display the batch version of the display showing only batches
and using S88 batch terminology
c. Procedures, which will display the procedure version of the display showing only
procedures and using procedure-based terminology
Tip:
If you have chosen the Activities option from the Operator's menu and
your summary display is showing a mix of batches and procedures, you
can use the Type column to filter to show only batches or procedures as
shown below.
Type filter column
Accessing a summary display from the Station menu
1. From the (missing or bad snippet) View menu, select one of the following options:
Station menu options for Activity, Batch, and Procedure Summaries
a. Activity Summary, which will display the generic version of the display showing a
combination of batches and procedures
b. Batch Summary, which will display the batch version of the display showing only
batches and using S88 batch terminology
c. Procedure Summary, which will display the procedure version of the display show-
ing only procedures and using procedure—related terminology
Tip:
If you have chosen the Activities option from the Station menu and your
summary display is showing a mix of batches and procedures, you can
use the Type column to filter to show only batches or procedures.
Honeywell 2017
253
Advertisement
Table of Contents
