Changing What Is Shown In The Message Summary; Using The Location Pane On The Message Summary - Honeywell Experion LX Operator's Manual

Responding to messages
Column Description
Date &
The time and date at which the message was received.
Time
Location
The tag name of the asset to which the point or device belongs.
Tag
The point or device that caused the message.
If the point ID is too long to be fully displayed in the alarm summary, it is truncated.
Source
To see the full name, place the mouse pointer over the partial point ID to display the
full point ID.
Message The text of the message.
Category The category of the message, such as 'Info message' or 'Operator change.'
Changed
The time that a condition changed state in the field.
Time
Condition The message condition.
Item The item name of the point where the message was generated.
Location The full path name of the asset to which the point or device belongs.
Location
The item name of the asset to which the point or device belongs.
Item
Quality The message quality.

Changing what is shown in the Message Summary

Attention:
Depending on your security privileges, you may not be able to filter and sort the
Message Summary. The options that are not available to you are disabled and are
dimmed.
By default, the Message Summary shows all messages, with the newest message at the top.
You can change the Message Summary by applying views, filters and sorting the summary.

Using the Location pane on the Message Summary

The Location pane provides a list of assets to which you have access. You can use the
Honeywell 2017
Message requiring two electronic signatures
179