Table of Contents
Advertisement
Using EFM meters
From the Alarm Summary, double-click an alarm for the meter point.
l
From the Alarm Summary, right-click on an alarm for the meter point and click
l
Detail Display.
From a custom display, double-click or press F12 on any point reference to the
l
meter point.
About Meter Detail displays
The Meter Detail display is where you review the meter status and control data collection and
export for an individual meter.
You can call up this display using any of the following methods:
Double-clicking an alarm for the meter point.
n
Right-clicking on an alarm for the meter point and selecting Detail Display.
n
Double-clicking on the meter in the location pane on the System Status display.
n
Entering the partial name or meter number in the Command Zone and then clicking
n
Detail on the toolbar, or pressing F12.
Item
Description
Enable
Channel
Controller
Associated asset
Honeywell 2017
Tip:
Use the * wildcard character in your search string to match zero or
l
more characters. For example, *FI546*
If you know the exact meter name you can press ENTER instead
l
of F12 (if this option has been enabled for your system), but this
will first search for a matching display name and only then look
for meter name if no display name is found. You must enter the
full ID of the meter when you use the ENTER key method.
Description
A description of the meter.
Enables and disables the meter.
A link to controller's parent channel.
A link to the meter's parent controller.
The name of the asset associated with the meter.
If there is no associated asset defined, this area is blank.
237
Advertisement
Table of Contents
