Table of Contents
Advertisement
Creating a batch or procedure
Summary display columns
The Activity, Batch, or Procedure Summary displays have a set of customizable columns
providing information about each batch, or procedure. The columns and their order can be
changed as for any other Summary display. The default columns are listed here. All of the
columns except Description and Status can be used to sort or filter the display.
Column
Batch ID
Recipe (Batch
Summary only)
Procedure (Procedure
Summary only)
Activity Entity
(Activity Summary
only)
Public Name
Asset
Unit
Type (Activity
Summary only)
Description
Stage
State
Status
Status Description
Create Time
Start Time
End Time
Honeywell 2017
Activity Summary display default columns
Description
The ID specified when the batch or procedural operation was created.
(optional value for Procedures)
The recipe on which the batch was based.
The procedure on which the procedural operation was based.
The recipe or procedure on which the activity was based.
The name that has been defined for the batch or procedural operation in
control builder.
The asset that the batch or procedural operation is associated with.
The unit that the batch or procedural operation is associated with.
Will be either Batch or Procedure.
Descriptive text about the batch/recipe or procedural operation.
The current point of the batch or procedural operation in the lifecycle.
Valid values are Pre-Exec, Exec, or Post Exec.
The sub-state of the batch or procedural operation within the Exec
stage, for example, Running.
The health of the batch or procedural operation within the Exec stage,
for example, OK.
Descriptive text about the current status of the batch or procedural
operation within the Exec stage.
Date and time the batch or procedural operation was created.
Date and time the batch or procedural operation started.
Date and time the batch or procedural operation completed.
254
Advertisement
Table of Contents
