Table of Contents
Advertisement
Operating a batch or procedure
Unit control
The unit control provides information about a UCM. Through its details pop-up and tool tips,
it provides information about which procedure is currently associated with its unit.
The following image shows an example of a unit control for a unit called Mixer 104, which is
active but currently has no procedures running.
Unit control
The following image shows an example of a unit control for a unit called Mixer 104, with no
header, but which is active with a procedure (S88 level procedure) running.
Unit control with a procedure running
The background color of the name/description text is white when the unit is active or
requiring Operator interaction. When the background is light gray, the unit is idle, completed
or otherwise held, stopped, or aborted.
Unit list control
The unit list control contains a list of Units (UCMs). If there is a lot of units in the list, scroll
buttons are provided to enable the Operator to scroll through the units.
The following image a list of unit controls. Two are active with procedures running. The first,
(Mixer 104) has an S88 procedure level of Unit procedure, while the second (Blender 02) has
an S88 procedure level of Phase.
The other two units are currently inactive.
Unit list control
The background color of the control can be configured to be specific colors, so the unit list
controls in your system may look different to the one shown here.
Honeywell 2017
281
Advertisement
Table of Contents
