Honeywell Experion LX Operator's Manual page 252

Creating a batch or procedure
Item Description
Tabs
Provide more information about the activity, batch, or procedural operation as well as
enabling control of the activity parameters. Tabs provided are:
General – provides basic information about the selected batch or procedure such as
n
Batch ID; Create, Start, and End times; current mode, stage, and state values; and
status.
3
Header Parameters – enables editing of items such as batch size and scaling factor.
n
Formula Parameters – enables editing of the individual formula input values
n
Report Parameters – enables editing of data to be included in batch reports
n
Units – enables editing of parameters for batches or procedures based on class based
n
recipes. (Note that the Unit tab is only visible when a class based recipe has been
used to create a batch or procedure).
Navigation links
Enables navigation to the displays related to this batch, or procedure. You can use these
4
links to view information about the activity. Navigate first to the activity's Detail Display,
then select the Resources tab.
Command lists
Provide the ability to:
Issue standard RCM/SCM commands to the selected batch, or procedure
n
5
View and control the mode setting of the selected batch, or procedure
n
View and control the mode attribute of the selected batch, or procedure
n
There are two ways to call up the Activity, Batch, or Procedure Summary display:
From the Operator menu
n
From the Station menu
n
Accessing a summary display from the Operator menu
1. From the (missing or bad snippet) Operator menu, select one of the following options:
Operator menu options for Activities, Batches, Procedures
Honeywell 2017
Summary display elements(continued...)
252