Logging On As An Override Using Signon Manager - Honeywell Experion LX Operator's Manual

Understanding the basics
To log on when a prompt appears
1. In the Station Operator Logon dialog box type your user name and your password.
Attention:
Your password, but not your user name, is case-sensitive.
Asterisks (*) appear as you type each character of your password.
2. Click OK.

Logging on as an override using Signon Manager

Using Signon Manager, you can temporarily log on as an override user. You can then issue
commands that require your security level. When you end the override, control automatically
reverts to the current user.
To log on as an override
1. Do one of the following:
If the Signon Bar is visible, click Signon/Override.
l
If the Signon Bar is not visible, click the
l
Windows taskbar to make the Signon Manager visible and then click Signon.
Press CTRL+ALT+S.
l
The Signon dialog box appears.
Attention:
If the card reader version of the Signon Manager button is displayed (
you may need to sign on with a smart card and enter authentication
information as required. This may include a PIN as well as a password,
depending on how your system has been configured.
2. Type your user name.
Tip:
Honeywell 2017
(Signon Manager) button on the
),
20