Faceplates With Specialized Behavior - Honeywell Experion LX Operator's Manual

Reference topics
changing the password, remember that it:
Consists of a minimum of 5 and maximum of 40 letters/numbers, without spaces
n
Is case-sensitive
n
Prerequisites
You must have MNGR security level to be able to change someone's password.
n
If you are using a Console Station, and your system uses separate user names and
n
passwords for Windows and Station, you can only change passwords when the
Experion server is available.
To change the password
1. Choose Configure>Operators to see the list of users.
2. Click the user whose password you want to change. The user's details appear. (You
can also change these details if required.)
3. Click Change Password.
The Change Password dialog box appears.
4. Type the new password and press the TAB key.
5. Re-type the new password and click OK. (The new password is only accepted if the
two entries are identical.)

Faceplates with specialized behavior

The following faceplates have specialized behavior.
Attention:
The auto-selection behavior described in this table only occurs if auto-selection
has been enabled for your system. To identify if auto-selection has been enabled
for your system, see the server wide settings display.
Faceplate file
name
sysdtlacc_fp.hda
Honeywell 2017
Faceplat
Description
e type
SCADA
Accumulator
Point
Point
OP
Auto
MOD / Auto select
selec
E? S element
t?
P?
No No No None
Behavior
Nothing is
auto
319