Ethernet Control; Accessing The Default Web Pages - Extron electronics DVS 304 Series User Manual

Ethernet Control

The DVS 304 features an on-board Web server, displayed as a set of default Web pages.
These pages allow you to control and operate the DVS 304 unit through its Ethernet port,
connected via a LAN or WAN, using a Web browser such as Microsoft Internet Explorer
(version 5.5 or higher).
This section describes these default Web pages, which are always available and cannot
be erased or overwritten.
Topics that are covered, include:
•
•

Accessing the Default Web Pages

Access the DVS 304 through the on-board Web server pages as follows:
1.
2.
3.
4.
5.
6.
7.
Accessing the Default Web Pages
Navigating the Default Web Pages
Double click the Web browser icon on the PC desktop to launch the Web browser.
Click in the Address field of the browser.
Enter the IP address of the unit in the Address field of the browser.
NOTE: If the local system administrators have not changed the value, the factory-
specified default, 192.168.254.254, is the correct value for this field.
If you want the browser to display a page other than the default page (such as a
custom page you have created and uploaded), enter a slash (/) and the file name to
open.
NOTE: The browser Address field should display the address in the following
format: xxx.xxx.xxx.xxx/{optional_file_name.html}
The following characters are invalid in file names: {space} ~ @ = ' [ ] { } < >
' " ; : | \ and ?.
Press the keyboard Enter key. The DVS 304 checks
to see if it is password protected.
If it is not password protected, proceed to step 7.
If it is password protected, the DVS 304 downloads
the
Enter Network Password
NOTE: A user name entry is not required.
Click in the Password field and type in the
appropriate administrator or user password.
Click .
OK
page.
DVS 304 Series • Ethernet Control
®
64