ITech IT7622 User Manual page 66

ООО "Техэнком" Контрольно-измерительные приборы и оборудование
Edit the saved List file
Description of soft keys under three-phase mode:
Parameter Explain
A-B-C Switch A/B/C phase to set the parameters quickly.
Insert Press it to insert a single step behind the current single
step.
Delete Press it to delete the current single step.
Next Record Press it to select next single step.
Pre Record Press it to select the previous step.
Configure Download configuration parameters.
The user can remodify the list file stored in the device based on the requirement.
The detailed operation steps are as follows:
1. Press [List] on the front panel to enter the List function configuration
interface, select soft key [standard].
2. Press [Edit Current] to enter the saved List01 csv file.
3. Edit the saved List02 csv file, as shown in the figure below.
Copyright ©ITECH Electronic
Co., Ltd.
www.tehencom.com
List Function
64