ITech IT7622 User Manual page 62

ООО "Техэнком" Контрольно-измерительные приборы и оборудование
Self-defined Edit the self-defined waveform. Refer to 8.3 "Self-defined
Waveform" for details.
Wave Edit
Standard Standard list
Surge-Trap Surge/trapped wave. Refer to 8.2 " Surge/trapped wave " for
details.
2. Press [Create New] to enter the List file configuration interface.
Description of List display zone:
Mainly display the edited List. View the list by pressing [Next] and [Forward].
Description of soft buttons on the List interface:
Parameter Explain
Insert Press it to insert a single step behind the current single
step.
Delete Press it to delete the current single step.
Next Press it to select next single step.
Forward Press it to select the previous step.
Graphy Viewer Display the waveform.
Configure Download configuration parameters.
3. Press the Up/Down key to select each parameter in the List edit zone.
Besides, the user can set the starting step, run count, end state of the
waveform, waveform type, frequency and amplitude by operating the
number keys and soft keys.
Parameters of the List editing zone are as follows:
Parameter Explain
Run Jump
Edit the starting steps of the List file.
Copyright ©ITECH Electronic
List display zone
Soft buttons
Co., Ltd.
www.tehencom.com
List Function
List editing
zone
60