Setting Guidelines; Signal Matrix For Binary Inputs Smbi; Application; Signal Matrix For Binary Outputs Smbo - ABB RES670 Applications Manual

Section 22
Basic IED functions
22.7.3
22.8
22.8.1
22.8.2
22.9
340
consists of values for current, voltage and apparent power and it is possible to have
twelve different sets.
This is an advantage since all applicable functions in the IED use a single source of
base values. This facilitates consistency throughout the IED and also facilitates a
single point for updating values when necessary.
Each applicable function in the IED has a parameter, GlobalBaseSel, defining one
out of the twelve sets of GBASVAL functions.

Setting guidelines

UBase: Phase-to-phase voltage value to be used as a base value for applicable
functions throughout the IED.
IBase: Phase current value to be used as a base value for applicable functions
throughout the IED.
SBase: Standard apparent power value to be used as a base value for applicable
functions throughout the IED, typically SBase=√3·UBase·IBase.

Signal matrix for binary inputs SMBI

Application

The Signal matrix for binary inputs function SMBI is used within the Application
Configuration tool in direct relation with the Signal Matrix tool. SMBI represents
the way binary inputs are brought in for one IED configuration.
Setting guidelines
There are no setting parameters for the Signal matrix for binary inputs SMBI
available to the user in Parameter Setting tool. However, the user shall give a name
to SMBI instance and the SMBI inputs, directly in the Application Configuration
tool. These names will define SMBI function in the Signal Matrix tool. The user
defined name for the input or output signal will also appear on the respective
output or input signal.

Signal matrix for binary outputs SMBO

1MRK 511 407-UEN C
GUID-E3F5D754-BD17-4729-895B-957A09C2AC75 v4
Phasor measurement unit RES670 2.2 IEC
Application manual
SEMOD55793-1 v2
M15310-3 v2
M15312-3 v3
SEMOD55215-1 v2