1MRK 511 407-UEN C
22.9.1
22.9.2
22.10
22.10.1
22.10.2
22.11
22.11.1
Phasor measurement unit RES670 2.2 IEC
Application manual
Application
The Signal matrix for binary outputs function SMBO is used within the
Application Configuration tool in direct relation with the Signal Matrix tool.
SMBO represents the way binary outputs are sent from one IED configuration.
Setting guidelines
There are no setting parameters for the Signal matrix for binary outputs SMBO
available to the user in Parameter Setting tool. However, the user must give a name
to SMBO instance and SMBO outputs, directly in the Application Configuration
tool. These names will define SMBO function in the Signal Matrix tool.
Signal matrix for mA inputs SMMI
Application
The Signal matrix for mA inputs function SMMI is used within the Application
Configuration tool in direct relation with the Signal Matrix tool. SMMI represents
the way milliamp (mA) inputs are brought in for one IED configuration.
Setting guidelines
There are no setting parameters for the Signal matrix for mA inputs SMMI
available to the user in the Parameter Setting tool. However, the user must give a
name to SMMI instance and SMMI inputs, directly in the Application
Configuration tool.
Signal matrix for analog inputs SMAI
Application
Signal matrix for analog inputs (SMAI), also known as the preprocessor function
block, analyses the connected four analog signals (three phases and neutral) and
calculates all relevant information from them like the phasor magnitude, phase
angle, frequency, true RMS value, harmonics, sequence components and so on.
This information is then used by the respective functions connected to this SMAI
block in ACT (for example protection, measurement or monitoring functions).
Section 22
Basic IED functions
SEMOD55213-5 v4
SEMOD55228-5 v2
SEMOD55233-1 v2
SEMOD55237-5 v2
SEMOD55247-5 v2
SEMOD55751-1 v2
SEMOD55744-4 v10
341