Power-Up And Shutdown Procedures; Power-Up Procedure; Shutdown Procedure - ETC SmartFade User Manual

Power-up and Shutdown Procedures

SmartFade uses the power button not only for power-up and power-down, but also to
access the operating mode selection menu.
P o w e r - u p P r o c e d u r e
The startup process will run once the console is powered up. This 2.5 second process
includes a welcome screen in the LCD window showing the software version currently
installed in the console. Also, the button LEDs will light as follows:
• All green bump LEDs fade in then out in the first half-second.
• All red bump LEDs fade in then out in the next half-second.
• All LEDs in the programming section of the console fade in then out in the next half-
second.
• All LEDs light to the levels appropriate to the selected mode of operation.
N o t e :
During the startup process, the LEDs will fade to full brightness, regardless of the user's
brightness settings.
Power up the SmartFade console:
Press and release the power button [
S h u t d o w n P r o c e d u r e
When you use the shutdown procedure, the SmartFade console will complete any pending
operations and save any system data as required to ensure error-free startup at the next
session. Disconnecting power from the console while it is shut down produces no ill effects.
Power down the SmartFade console:
Step 1:
Step 2:
4
Press and release the power button [
you confirm the shutdown command.
Press:
• [ ] to confirm and shut down the console.
• [<] to cancel shutdown and resume operation.
].
]. The LCD shows a message asking that
SmartFade v1.6 User Manual