Upfade, Downfade, And Wait Times - ETC SmartFade User Manual

U p f a d e , D o w n f a d e , a n d W a i t t i m e s
You can adjust the upfade or downfade times of any step of any sequence using the LCD
Menu (see
Adjust up, down, or wait times:
Step 1:
Step 2:
Step 3:
Step 4:
Step 5:
Step 6:
Step 7:
Step 8:
N o t e :
"Wait" times are applied at the end of a step, not at the beginning. Therefore, by adding
a wait time, you are delaying the start of the next cue in the STACK or sequence.
Step 9:
Step 10: After adjusting times, you may use the dial to choose a different step in the
2
Normal Mode
Normal Mode LCD Menu, page
Press [ ] to enter the menu.
Use dial to scroll through the menu to find the "Sequences" menu.
Press [ ]. The screen "Playback" will become visible.
Use the dial to scroll between your option of which sequence you would like to
control. "XF" represents the STACK, "21-24" represent the sequence faders of
the current memory page. To access the sequences on another memory page,
simply hold [MEMS] and press the bump of the page you wish to access.
Press [ ] once you have selected the STACK or sequence you wish to alter.
Select "Step Timing" and press [ ].
Select "One Step" and press [ ].
Press [ ] to move between step number, U (upfade) D (Downfade) and W
(Wait).
Use the dial to increase or decrease the amount of time in any of these fields.
Time is given in seconds.
sequence or press [<] to return to the previous menu.
38). You can also add a wait time to any step.
35