Undo - ETC SmartFade User Manual

C L E A R
[CLEAR] may be used either by pressing the button a certain number of times to perform
a certain function, or in combination with another button.
M o m e n t a r y f u n c t i o n s o f [CLEAR]
• No Action . . . . . . . . . . . . . . .Press [CLEAR] once or with more than 1.5 seconds
• Channel Levels . . . . . . . . . .Press [CLEAR] [CLEAR].
• Memory Levels . . . . . . . . . .Press [CLEAR] [CLEAR] [CLEAR].
• All Levels/All Sources . . . . .Press [CLEAR] [CLEAR] [CLEAR] [CLEAR]. This
H e l d f u n c t i o n s o f [CLEAR]
• [CLEAR] [MEMS] . . . . . . . .Clears all levels from memories on the current page.
• [CLEAR] [1-24] or [1-48]. . .Clears all levels from faders 1-24 (1-48)
• [CLEAR] [25-48] or [49-96].Clears all levels from faders 25-48 (49-96)
• [CLEAR] [RATE]. . . . . . . . .Sets Rate and Fade back to 100% (no overrides).
• [CLEAR] [BUMP 1-24 (48)] Clears the level of the selected fader.
• [CLEAR] [SNAPSHOT]. . . .Deletes all recorded snapshots and resets the counter to 1.
• [CLEAR] [ .. ] . . . . . . . . .In STACK mode, resets to top of STACK (Step 0).
U N D O
[UNDO] undoes the last record action that saved to the show file. [UNDO] affects the
following functions:
• REC MEM . . . . . . . . . . . . . .[UNDO] replaces the recording with the previous memory
• EDIT MEM . . . . . . . . . . . . . .[UNDO] replaces all modified channels with previous
• REC SEQ. . . . . . . . . . . . . . .[UNDO] replaces the entire sequence with the previous
• COPY. . . . . . . . . . . . . . . . . .[UNDO] replaces the memory or sequence just copied with
• PATCH. . . . . . . . . . . . . . . . .[UNDO] replaces the patch with the previous values.
2
Normal Mode
between presses.
produces a blackout (IND 1 and IND 2 are unaffected).
content.
memory content.
sequence content.
the previous content.
37