Maintenance; Cleaning The Enclosure Exterior; Replacing The Fuse - GE Hydran M2-X Instruction Manual

Hydran* M2-X Instruction Manual

9 Maintenance

The maintenance schedule suggested in this Chapter provides optimum
performance and reliability from the Hydran M2-X. The maintenance routines should
be performed in fair weather.
WARNING
Note: Some steps in the maintenance procedures described in this Chapter may not
apply, depending on the option(s) installed.
CAUTION
The Hydran M2-X requires very little maintenance.

9.1 Cleaning the Enclosure Exterior

WARNING
There are no inside parts that you can service; maintenance or cleaning of
internal parts is not necessary.
To clean the exterior of the enclosure, use a clean cloth that is dry or slightly
damp.
CAUTION

9.2 Replacing the Fuse

In case the fuse of the Hydran M2-X has blown off, remove the fuse holder and
replace the fuse.
MA-029 Rev. 1.0, 30-Jul-18
All procedures in this manual must be strictly adhered to.
Any deviation from these could cause irreversible damages
to the Hydran M2-X and/or the transformer being monitored,
and could lead to property damage, personal injury and/or
death. Installation and maintenance of the Hydran M2-X
must be carried out by qualified personnel only.
Please advise the station operator prior to maintenance.
Working inside the Hydran M2-X may trigger unwanted
alarms due to parameter changes, power shutdown, system
rebooting or electro-static discharge.
Do not remove the cover, to prevent electric shock.
Do not use cleaning agents or chemicals, as they may
damage the plastic parts or lettering.
Page 135