Verification, Installation And Configuration; Incoming Inspection; Reception And Unpacking; Shipping List - GE Hydran M2-X Instruction Manual

4 Verification, Installation and Configuration

WARNING

4.1 Incoming Inspection

4.1.1

Reception and Unpacking

Upon reception, the shipping box contains one pre-assembled Hydran M2-X.
1. Open the shipping box, and remove the documentation and the small bag
containing the accessories and tools.
2. Carefully remove the Hydran M2-X from the shipping box.
CAUTION
Note: Keep the packing material for storage or further shipment of the Hydran
M2-X.
4.1.2

Shipping List

This Section lists all items included in the shipment of a Hydran M2-X. If any item
is missing, contact the General Electric Customer Service (the coordinates can be
found at the bottom of page 9).
1. One pre-assembled Hydran M2-X, including:
• Cover.
• Sensor with protective plastic cap.
• Electronic card cage with optional I/O.
• Heater plate.
• Sensor clamp.
2. Software and manuals:
• The installation CD-ROM that includes the following items:
– Perception Desktop software.
– The latest version of the embedded programs (firmware; for more
information, see Appendix F).
– The three manuals in PDF format: the Hydran M2-X Instruction Manual
(this manual), the Hydran M2-X Installation Guide and the Perception
Software Manual.
Page 66
Read all warnings and recommendations in Chapter 1 before
proceeding with the installation.
Do not remove the plastic cap from the Hydran M2-X sensor.
This cap protects the sensor's threads and membrane.
Hydran* M2-X Instruction Manual
MA-029 Rev. 1.0, 30-Jul-18