Service History - GE Hydran M2-X Instruction Manual

• Comm#2:
communication port #2 of the controller board.
• IO#1: Used to connect one of the three types of optional I/O interfaces (analog
input, 4-20 mA analog output or TDM signal).
• IO#2: Same as IO#1
• IO#3: Same as IO#1
• IO#4: Same as IO#1
• Sensor Card #1: Currently, this port is used by the H2/H2O/B.P. Temp card,
which is an interface for the gas sensor, moisture sensor and heater plate
temperature signals.
• Sensor Card #2: There is currently no such card.
• Sensor Card #3: There is currently no such card.
3.6.5.2 Detected Config
This function is identical to Current Config. See Section 3.6.5.1.

3.6.6 Service History

This function is identical to View Readings > View History Data > Service Hist.
(see Section 3.4.2.4).
Page 64
The TDM and RS-485 link board is currently connected to the
Hydran* M2-X Instruction Manual
MA-029 Rev. 1.0, 30-Jul-18