General Warnings - GE Hydran M2-X Instruction Manual

1 General Warnings

WARNING
1. Do not remove the plastic cap from the sensor's threaded extremity until the
sensor is installed on the valve (see Figure 1-1). This cap protects the threads and
the sensor from debris and sharp objects. If the sensor is unmounted, place
immediately the cap onto its threads.
Figure 1-1: Plastic Cap Must Remain in Place Until the Sensor Is Installed on the Valve
Page 16
Mishandling of the Hydran M2-X sensor (such as a
perforation or scratch on the membrane or subjecting the
sensor to paint or solvent) voids the warranty.
Hydran* M2-X Instruction Manual
MA-029 Rev. 1.0, 30-Jul-18