Description Of The Error Message System; Repair - Hermle Z 206 A Operating Manual

REPAIR

4.2.2 Description of the Error Message System

The error message is shown in the "time" (A-3) display through a two-digit number . At the same
time the word "error" (M11) is indicated in the display (see figure 18, chapter 2.6 Imbalance). More
details see "table 5: error messages" (see APPENDIX S.VI).
5. REPAIR
Health risk from contaminated equipment, rotors and accessories
In case of returning the centrifuge for repairing, to the manufacturer, please know the following:
The centrifuge must be decontaminated and cleaned, before shipment, for the protection of
persons, environment and material.
Decontamination certificate at goods return delivery (see APPENDIX P. VIII)
We reserve the right to accept contaminated centrifuges.
Furthermore, all costs that may have occurred during the cleaning and disinfection of the units, will
go to the debit of the customer's account.
Return of Power Cords
In case of a return of a centrifuge, we also ask you to send its power cord. This eliminates the risk of
a faulty power cord. If no power cord is attached to the centrifuge, a new one will be delivered and
charged.
We ask for your understanding.
22
Z206A_V1.18_eng © Hermle Labortechnik GmbH