Transport, Storage, Disposal; Transport; Storage; Disposal - Hermle Z 206 A Operating Manual

6. TRANSPORT, STORAGE, DISPOSAL

6.1 Transport

- Before transporting, take out the rotor.
- Only transport the unit in its' original packaging.
- Use a transport aid, for transporting over longer distances, to fix the motor shaft.
General Transportation

6.2 Storage

During storage of the centrifuge, the following environmental conditions must be observed:
Transport Packaging

6.3 Disposal

In the event of disposing of the product, please observe the applicable legal requirements.
Information on the disposal of the electrical and electronic devices, in the European
Community:
The disposal of the electrical devices is regulated within the European Community, by national
regulations, based on EU Directive 2002/96/EC pertaining to waste electrical and electronic
equipment (WEEE).
In accordance with this, any devices delivered after 08/13/2005 on a business-to-business basis,
including the product, may no longer be disposed of, as a household waste. To document this, the
devices have been marked with the following identification:
Because disposal regulations may differ from one country to another, within the EU, please contact
your supplier, if necessary.
RoHS II Compliance
HERMLE Labortechnik GmbH, Siemensstraße 25, 78564 Wehingen, hereby declares and certifies
that all components manufactured are RoHS II compliant, according to the definition and restrictions
given by the European Parliament Directive 2011/65/EC. This restricts the use of certain hazardous
substances in electrical and electronic equipment.
© Hermle Labortechnik GmbH
Air
Temperature
-25 to 60 °C
-13°F to 140°F
-
Air
Temperature
-25 to 55 °C
-13°F to 131°F
Z206A_V1.18_eng
TRANSPORT, STORAGE, DISPOSAL
Rel. Humidity Air Pressure
10 to 75 % 30 to 106 kPa
Rel. Humidity Air Pressure
10 to 75 % 70 to 106 kPa
23