4.
Component Expansion/Function Enhancement
Installing Additional Drive Enclosures
Additional Drive Enclosure Installation Procedure
This section explains how to install additional drive enclosures in the ETERNUS DX.
When connecting the mini SAS HD cable between enclosures, check the direction of the connector (the tab
must be pointed downward) and firmly insert all the way in.
To disconnect the mini SAS HD cables between enclosures, hold the tab and then pull out the connector.
FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Operation Guide (Basic)
Do
If components are installed in a way other than as described in this section, damage
•
and/or device failure or electrical shock may occur.
Do not install the drive enclosure in the rack with cables, such as power cords, connec-
•
ted.
Do not knock the other devices installed in the rack when installing drive enclosures.
•
Tab
56
Copyright 2018 FUJITSU LIMITED
P3AM-9012-08ENZ0