Fujitsu ETERNUS DX60 S3 Operation Manual page 65

4. Component Expansion/Function Enhancement
Installing Additional Drive Enclosures
The process to disconnect IOM#1 starts.
When the disconnection process is complete, the [Detach Cable] screen appears.
11
Disconnect the cables from I/O module line 1.
Remove the cable that connects the DI (OUT) port of CM#1 in the controller enclosure and the DI (IN) port
of IOM#1 in the drive enclosure, which is nearest to the drive enclosure that is to be added.
The following figure shows the cable (between CE and DE) that needs to be disconnected from the enclo-
sures when drive enclosure 2 is added.
65
FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Operation Guide (Basic)
Copyright 2018 FUJITSU LIMITED
P3AM-9012-08ENZ0