Fujitsu ETERNUS DX60 S3 Operation Manual page 50

4. Component Expansion/Function Enhancement
Installing Additional Drives
■
For 2.5" Drives
1
In the [Storage] screen of [Component] on the ETERNUS Web GUI screen, check that all components of the
ETERNUS DX are in normal status.
2
Wear a wrist strap or touch a metal part to discharge the human body's natural static electricity.
3
Remove the dummy drive unit from the slot in which the drive is to be installed.
Push into the tab of the dummy drive unit and pull it straight out of the drive slot.
Tab
Keep the removed dummy drive units in a safe place where they will not be lost.
4
Install the new drive.
(1)
Press the catch on the drive lock lever to unlock it.
Catch
FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Operation Guide (Basic)
Dummy drive unit
Lock lever
Copyright 2018 FUJITSU LIMITED
50
P3AM-9012-08ENZ0