Fujitsu ETERNUS DX60 S3 Operation Manual page 27

1. Component Names and LED Names
Drive Enclosures
LED name
DI (IN) FAULT
DI (OUT) LINK
DI (OUT) FAULT
READY
IDENTIFY
FAULT
FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Operation Guide (Basic)
LED status Meaning
The link between the DI (IN) port and the source port is in error
(amber)
status.
The ports to connect the cables are indicated. This occurs while a
(blinks amber)
drive enclosure is being added.
The link between the DI (OUT) port and the destination port has
(green)
been established.
The link between the DI (OUT) port and the destination port is in
(amber)
error status.
The ports to connect the cables are indicated. This occurs while a
(blinks amber)
drive enclosure is being added.
The I/O module is in normal status.
(green)
The installation location of the I/O module is identified according
(blinks blue)
to the instruction that is issued from ETERNUS Web GUI or ETER-
NUS CLI.
The I/O module is in error status.
(amber)
27
Copyright 2018 FUJITSU LIMITED
P3AM-9012-08ENZ0