Fujitsu ETERNUS DX60 S3 Operation Manual page 53

4. Component Expansion/Function Enhancement
Installing Additional Drives
(3)
Swing the lock lever in the direction of the arrow, until the lock clicks shut.
(4)
Check that the newly installed drive's DRIVE READY LED lights up green.
5
To install more additional drives, repeat
6
If a wrist strap is used, remove the wrist strap.
7
In the [Drives] screen of [Component] on the ETERNUS Web GUI screen, check that the added drives have
been recognized.
8
Set up RAID groups, volumes, hot spares, and host affinity settings, as required.
FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Operation Guide (Basic)
Do
• Hold the drive with both hands to protect against jarring.
Step 3 and Step
53
Copyright 2018 FUJITSU LIMITED
Lock lever
4.
P3AM-9012-08ENZ0