Fujitsu ETERNUS DX60 S3 Operation Manual page 66

4. Component Expansion/Function Enhancement
Installing Additional Drive Enclosures
The FAULT LED for the DI (IN) port from which the cable is to be disconnected and the LINK/FAULT LED for
the DI (OUT) port in the controller enclosure turn on.
Drive enclosure 2
(drive enclosure
that is to be added)
Drive enclosure 1
Controller enclosure
12
Click the [Next >>] button.
The [Connect Cable] screen appears.
13
Connect the DI (OUT) port of CM#1 in the controller enclosure to the DI (IN) port of IOM#1 in the drive
enclosure that is to be added with a mini SAS HD cable between enclosures.
The following figure shows how a mini SAS HD cable between enclosures (CE and DE) is connected when
drive enclosure 2 is added.
FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Operation Guide (Basic)
Remove from here
66
Copyright 2018 FUJITSU LIMITED
Remove from here
Controller 1
P3AM-9012-08ENZ0