Additional Drive Enclosure Installation Procedure - Fujitsu ETERNUS DX S5 Series Operation Manual (Basic

4. Component Expansion/Function Enhancement
Installing Additional Drive Enclosures
■
About Static Electricity
■
About Shock

Additional Drive Enclosure Installation Procedure

This section explains how to install additional drive enclosures in the ETERNUS DX.
• When handling drive enclosures, wear a wrist strap or touch a metal part to
discharge the human body's natural static electricity. Failure to discharge static
electricity may cause failure in the ETERNUS DX.
• Do not handle the drive enclosure roughly or subject it to physical shocks when
laying it down.
• Do not stack the drive enclosures.
• Do not knock or drop the drive enclosure on hard objects.
• If components are installed in a way other than as described in this section,
damage and/or device failure or electrical shock may occur.
• Do not install the drive enclosure in the rack with cables, such as power cords,
connected.
• Do not knock the other devices installed in the rack when installing drive
enclosures.
44 Operation Guide (Basic)