Network Settings - ETC Ion Operation Manual

You can also retrieve these versions from the archive to save them to a USB drive by using the File
Manager.
Note:
from ETC. This includes the version of software that is currently installed from the factory as
well as any patches to that version (if available). For future release, you will need to down-
load the Eos Family software from the ETC website, etcconnect.com.
Fixture Library Updates
{Software Update} also recognizes .zip files provided by ETC, which contain fixture library files.
Fixture library update files are distributed as a .zip file, which can be installed on Eos Family consoles,
ETCnomad PC, and ETCnomad Mac devices.
Updating with a .zip file
1. Select the desired .zip file from the Software Update window.
2. You will be asked to confirm that you want to install the selected file. Click {Yes} to continue
or click {No} or {Cancel} to return to the Software Update window.
3. A window will open showing the progress of extracting the .zip file. The installer will then
launch after the file has been extracted.

Network Settings

The following options are available in this display :
Local Area Connection
Enable Remote Startup/Shutdown
Network Interface Delay
Ping
Output Protocols
Interface Protocols
DHCP Service
Update Service (TFTP)
Time Service (SNTP)
Local Area Connection
These are the settings that determine the method to get an IP address and/or the actual IP address
information that Ion uses for network communication.
Eos Configuration Utility
On new consoles, some versions are preselected to be archived when it initially ships
453