Table of Contents
Advertisement
For Eos Family devices that do not have a [Snapshot] hardkey, there is a {Snapshot} softkey that is
available in the Update display.
Updating to References
When a cue is active, it is possible that various record targets (palettes or presets) will be played back
within that cue. As changes are made to the data in that cue, as well as to the individual palettes or
presets, updating both the cue and references within that cue is simple. When you have overridden a
reference in a cue, the data is displayed in red with a red "R" in superscript next to the channel's
intensity.
By default, Ion updates any referenced data that was included in the cue.
For Example:
Cue 5 is recalled Live. It contains references to color palette 1 and preset 2. You make
changes to channels included in these record targets. To update both the cue and the
palettes/presets, press:
This will automatically take the manual changes and update them to color palette 1 and
preset 2. Therefore cue 5 now references these new values, and the modifications to CP1
and PR2 have propagated through all of the show data.
If you had made changes to other channels that were not included in the palettes/presets
used in cue 5, those values would also be updated to the cue as absolute data.
Updating Without References (Make Absolute)
If you want to record your changes to the cue without updating the references, you may use {Make
Absolute} to break the association to the reference. The {Make Absolute} command can be applied
to the channels/parameters required before the update instruction, or they can be applied during the
update.
[Update] {Make Absolute} [Enter] - this will break the references for any parameters which
have been changed and update the cue with the changes. The referenced target will no longer
be displayed in the channels which were made absolute. All of the data updated in cue 5 will
now be shown as absolute data.
[5] [Thru] [9] [Update] {Make Absolute} [Enter] - this will break only the references for channels
5-9 and record their manual values to the cue. Other manual values will not be included in this
update.
You may also use [Record Only] to break references.
For Example:
Cue 5 is active and onstage. Channels 5 through 20 are currently referencing preset 1. You
make changes to channels 5 through 9. The data for these changes is now manual. Press:
Working with a Single Cue List
[Update] [Enter]
[Record Only] [Enter] [Enter]
253
Advertisement
Table of Contents
