Table of Contents
Advertisement
The {Calibrate} button will now only appear on scroller parameters that are currently not at the cen-
ter of a frame.
Reordering Shutters
Shutters can be reordered in the Patch {Attributes} page. Press the {Shutter Order} button to open
the shutter order display. The {Shutter Order} button will only display if a channel with shutters is cur-
rently selected.
In this display, you can invert the {Shutter Order} or rotate the order using the arrow buttons. After
you have created the order needed, press {Apply} for your changes to take effect.
Invert Rack
An {Invert Rack} option is available in Patch>Attributes>Scrollers/Wheels. This option will only display
when a fixture with a shutter frame assembly parameter is selected.
The shutter frame assembly parameter allows for the shutter assembly to be turned. When {Invert
Rack} is disabled, a encoder will move the frame assembly from the right. When enabled, the frame
assembly will move from the left.
Settings in Patch
Softkeys available for use while in patch include {Patch}, {Attributes}, and {Database}. Pressing any of
these softkeys opens a paged view of the patch display and redraws the CIA to an expanded view of
fields related to the selected page.
When creating and editing your patch, page through each of these softkeys individually to enter
more specific data about your selected device.
{Patch} Display and Settings
With patch open, Ion defaults to this display. It provides access to data input fields that you may use
to define devices in your lighting system.
Note:
The Artnet and sACN offset will display here.
Patch
117
Advertisement
Table of Contents
