Table of Contents
Advertisement
Note:
page 55)
Offset
{Offset} is a feature used to select a range of channels from a broader channel selection. For the off-
set feature to function, you must first select a group of channels, then press {Offset}.
When {Offset} is pressed, a channel distribution display will open with multiple Offset options. For a
full list of these options, see
These keys, along with the numeric keys from the keypad are used to create channel offsets. These
channel commands can be combined with group record functions.
The following examples illustrate how offset works:
[1] [Thru] [10] {Offset} {Even} [Enter] - selects channels 2, 4, 6, 8, 10.
[1] [Thru] [2] [0] {Offset} [3] [Enter] - from the selected group, this syntax would select chan-
nels 1, 4, 7, 10, 13, 16, 19 which is an offset of every third channel from the selection.
{Group 5} {Offset} {Random} [Enter] - selects all channels in Group 5 and places them in ran-
dom order. This selection may be used only temporarily or it may be recorded to a new Group.
[1] [Thru] [2] [0] {Offset} {Even} {Random} [Enter] - selects all even channels within the range
and puts them in random order.
{Group 3} {Offset} {Reorder} [Enter] - reorders the channels in group 3 so they are in numeric
order.
{Offset} [4] [Enter] -selects every fourth channel in the current channel selection.
[1] [Thru] [2] [4] {Offset} [4] [/] [4] [Enter] - selects channels 4, 8, 12, 16, 20, and 24. You can
select to offset by 2/2, 4/4, 3/3 etc.
[1] [Thru] [1][2]{Chan Per Group} [3] {Jump} [1] [Enter] would create these 3
channels each: (1,2,3) (5,6,7) (9,10,11). Channels 4, 8, and 12 will be jumped over and will not
be in the subgroups.
Select Channels From the Direct Selects
Direct selects provide one-touch selection of channels, groups, palettes, presets, effects and mac-
ros. You can configure an array of channels on direct select that display with paging buttons
provided for easy scrolling. See
Open a direct select display by select {DS} from the Home Screen and then select the {Channels} but-
ton. When channels are posted to the direct selects, you can select one simply by pressing the chan-
nel's touchbutton. The command line will show the appropriate channel and the selected direct
select will be outlined in yellow.
156
[Next] and [Last] work with the current flexichannel state. See
Offset (on
Using Direct Selects (on page 65)
page 188).
Using Flexichannel (on
subgroups
of 3
Ion Operations Manual
Advertisement
Table of Contents
