Cobalt 8.1 - 20181029
System Settings - Network (8.0)
These are specific network settings.
NET3 SERVICES
Net3 Services are a suite of services that provide infrastructure support for a Net3/ACN network.
Those services are a dynamic IP address server, a network time server and a file server. Each of these
services are described below. Unchecking this box acts to disable all of the Net3 Services. Checking
the box only enables services selected to be active.
DCHP Service
Clicking in the enable box for PORT 172 will activate the Net3 settings for Address or Time Server,
or TFTP (file transfer for software distribution).
Address Service (DHCP)
Net3 Services uses a DHCP (Dynamic Host Configuration Protocol) address server. DHCP is a
TCP/IP protocol that dynamically assigns an IP address to a network device when it requests one. This
174