Table of Contents
Advertisement
Pressing any of these parameter controls buttons will affect the selected channel after a con-
firmation.
Exit the lamp controls display by pressing [Displays].
Using [+%] and [-%]
Use [+%] and [-%] keys to incrementally change parameter values.
By default, the [+%] and [-%] keys are assigned a value of 10. This can be changed in Setup. See
Manual Control (on page 144)
Channel Intensity
When channels are selected, pressing [+%] increments the intensity level by 10 (or by the value
established in Setup, see
ment the intensity level by 10. You may use these keys consecutively to "add to" or "subtract from"
the intensity level.
For Example:
Select channels 1 through 10 and set them to an intensity level of 45% from the keypad.
Change the intensity level to 65% using the [+%] key, which is set to its default value of
10% in the setup menu.
Non-intensity Parameters
The [+%] and [-%] keys may be used to incrementally adjust non-intensity parameters as well.
For Example:
176
for more information.
Manual Control (on
[1] [Thru] [1] [0] [At] [4] [5] [Enter]
[+%] [+%]
[1] {Iris} [+%] [+%]
{Zoom} [-%] [-%]
page 144). Alternatively, you may press [-%] to decre-
Ion Operations Manual
Advertisement
Table of Contents
