Table of Contents
Advertisement
Scroller Calibration Column
Calibration information will be displayed in the scroller calibration column. Values in gray are the
default data, and the values in blue are calibrated data.
The displayed calibration information is the DMX level that puts the frame into its center position.
Information in the calibration column can be manually edited by clicking on it and typing in a new
DMX level.
Note:
Data will not be displayed when viewing a wheel with an empty command line.
Note:
[Clear]. If you are entering in new data and hit [Clear], the data will return to the default and
not any previously calibrated data.
Pressing the softkey {Clear Calib} will clear out the calibration data for the whole scroller wheel,
returning it to the default data.
Scroller wheels and their calibration data can be copied to other channels.
[1] {Copy Scroller} [2] [Enter] - copies the scroller and calibration data from channel 1 to chan-
nel 2.
Scrollers that have calibrated data will display a "~" after their name.
116
Calibration data will only be applied to scroller wheels that are assigned to a channel.
Calibration data can be returned to its default by clicking on the data and pressing
Ion Operations Manual
Advertisement
Table of Contents
