Table of Contents
Advertisement
With Auto Playback Enabled
Auto Playback is a record function enabled in
executes cues recorded in live on playback faders. When the cue is executed on the playback fader,
any manual parameters involved in the record operation are automatically released to the cue and all
other values stored in the cue are owned by that cue.
When the first cue is stored on Ion, the cue list of that cue automatically loads on the master fader.
Any subsequent cue lists stored will load to the next available fader.
Assigning Faders Manually
The location of playbacks, submasters, palettes, and presets on faders can also be defined as the con-
tents of those targets are stored.
Note:
figuration display or the fader list. See
information.
If a fader is unmapped, a target can be loaded to that location by selecting the target from the com-
mand line and pressing the associated [Load] key. The fader will then be automatically assigned that
target.
Once a cue list is loaded to a fader, storing to that cue list automatically plays the cue back on the
appropriate fader, when
If a fader has been configured for default mapping ( see
information), the fader will receive its configuration from the Cue List Index. Changes made to a cue
list in the cue list index will be shared with any default mapping faders loaded with that cue list. If
changes are made to a fader set to default mapping in the fader configuration display, those
changes will also happen in the Cue List Index. If set to Local, any changes made in the fader con-
figuration display will impact only that instance of the content.
To load a new cue into the pending file of a playback fader, when auto playback is disabled in setup,
or when you want to move a cue list to a different fader, first place that cue or list number on the
command line then press the associated [Load] button for the destination playback fader.
[Cue] [4] [Load] - changes the selected cue and loads it to the associated fader. This action
assumes cue 4 is from the same cue list as is currently selected.
[Cue] [3] [/] [Load] - changes the selected cue list and loads it to the associated fader.
[Cue] [5] [/] [6] [Load] - changes the selected cue list and loads it to the associated fader with
cue 6 as the pending cue.
Changing Fader Pages
Ion has 100 pages of ten faders each. When using virtual faders, you can page through the available
pages of faders by clicking the desired page in the
advance through the page number buttons until you find the desired page. When using fader wings,
holding down [Fader Control] and bump buttons (if available) will change to the appropriate page.
Cue Playback
You cannot define grandmasters in this manner, they must be defined in fader con-
auto playback
Setup>User>Record
Grandmaster Configuration (on page 79)
on record is enabled in
Setup>User>Record
Fader Configuration (on page 74)
virtual fader
display. Click the arrow buttons to
Default, that automatically
for more
Defaults.
for more
297
Advertisement
Table of Contents
