Initial Start-Up - Thermo Scientific HM340E Operation Manual

Initial Start-up

Note
The type of examination materials used and all special conditions for their processing, pre-treatment and, if
necessary, storage as well as instrument controls for correct and safe operation are the responsibility of the operator.
The operator is also responsible for special equipment and materials and/or reagents used for the operation of the
instrument.
The operating panel, which is packed separately, can be attached to the instrument or used freestanding. First
connect the operating panel with the instrument:
a For service purposes only
b Operating Panel
c Not used
d Cover for fuses
e Power switch
f Power socket
•
Connect the cable of the operating panel to the connector (b) on the rear side of the microtome and
fasten it with the two screws.
•
Should the operating panel be attached to the instrument, push the connector through the
corresponding hole on the rear side of the microtome.
•
The operating panel can be used freestanding. It can be placed on the left as well as on the right side of
the microtome.
•
The knobs are separately packed and must be attached to the operating panel.
•
The knobs can easily be removed and placed on the either side of the operating panel.
Thermo Scientific Rotary Microtome HM 340E
19