Smartgen HGM410E User Manual page 6

Battery Voltage (VB)
Charger Voltage (VD)
Hours counter (HC): Max. 999999 hours
Start times: Max.999999 times
 Protection: automatic start/stop of the genset, ATS(Auto Transfer Switch) control
with perfect fault indication and protection function;
 With ETS, idle control, pre-heat control, speed raise control and speed drop control,
All output ports are relay-out;
 Parameter setting: parameters can be modified and cannot be lost even in case of
power outage; all the parameters can be adjusted using front panel of the controller
or via PC using an SG72 adaptor.
 Multiplex input port 3 and 4 can be used in various fields: input 3 can be used as
digital input port or fuel level sensor while input 4 can be used as digital input port
or flexible sensor.
 More kinds of curves of temperature, oil pressure, fuel level can be used directly
and users can define the sensor curves by themselves;
 Flexible sensor: can be set as temperature sensor, oil pressure sensor or fuel level
sensor, enable the detection of double temperature, double oil-pressure and
double fuel level.
 Multiple crank disconnect conditions (speed sensor, oil pressure, generator
frequency) are optional;
 Widely Power supply range: DC(8~35)V, suitable to different start battery voltage
environment.
 All parameters used digital adjustment, instead of conventional analog modulation
with normal potentiometer, more reliability and stability;
 Modular design, anti-flaming ABS plastic enclosure, pluggable connection terminals
and embedded installation way; compact structure with easy mounting.
HGM400E Series Genset Controller
HGM400E Series Automatic Control Module
V (unit)
V (unit)
ISSUE 2013-08-28 Version 1.1 Page 7 of 41