Table of Contents
Advertisement
No
Items
29
Low Oil Pressure
30
Low Fuel Level
31
Flexible Sensor
Loss
of
Speed
32
Signal
33
Charge Alt Failure
Battery
34
Voltage
Battery
Under
35
Voltage
HGM400E Series Genset Controller
HGM400E Series Automatic Control Module
Range
(0-400)kPa
(0-100)%
(80-140)º C
(0-400)kPa
(0-100)%
(0-20.0)s
(0-30)V
Over
(12-40)V
(4-30)V
ISSUE 2013-08-28
Default
When
the
sensor value falls below this set
value, low oil pressure signal is
sent. Detecting only after safety
on delay is over. If the set value
103
is 0, low oil pressure signal will
not be sent (this only concerns
pressure sensor and does not
concern low oil pressure warning
signal via configurable input port)
When the liquid level of the
external sensor falls below the
set value, "Low Fuel Level" timer
is initiated. If the set value is 0,
10
low liquid level signal will not be
sent. (this only concerns fuel
level
sensor
concern low fuel level warning
signal via configurable input port)
Each value correspond to above
98
28 (Temperature sensor), 29 (oil
103
pressure sensor) and 30 (level
10
sensor), respectively.
If the set value is 0, only warning
5.0
and
not
generator.
During
running, when alternator D+(WL)
6.0
voltage has fallen below the set
value and remains for 5s, It will
initiate a shutdown alarm signal.
When
battery
exceeds
remains for 20s, It will initiate a
33.0
warning
warning and not to shutdown the
generator.
When battery voltage has fallen
below the set value and remains
8.0
for 20s, It will initiate a warning
alarm signal. Only warning and
not to shutdown the generator.
Version 1.1
Description
external
pressure
and
does
to
shutdown
generator
is
normal
voltage
the
set
value
alarm
signal.
Page 24 of 41
not
the
has
and
Only
Hide quick links:
Advertisement
Table of Contents
