Smartgen HGM410E User Manual page 13

9 Auxiliary Input
Loss Of Speed
10
Signal
Low Coolant
11
Level
Temp. Sensor
12
Open
Oil Pressure
13
Sensor Open
Level Sensor
14
Open
Temp. Sensor
15
2 Open
Oil Pressure
16 Sensor
Open
Level Sensor 2
17
Open
High
18
Temperature 2
HGM400E Series Genset Controller
HGM400E Series Automatic Control Module
When the controller detects that the auxiliary input warning
signals, it will initiate a warning alarm and the corresponding
alarm information will be displayed on LCD.
When the controller detects that the engine speed is 0 and
the delay is 0, it will initiate a warning alarm and the
corresponding alarm information will be displayed on LCD.
When the controller detects the low coolant level input is
active, it will initiate a warning alarm and the corresponding
alarm information will be displayed on LCD.
When the controller detects that the temperature sensor is
open circuit and the action select "Warn", it will initiate a
warning alarm and the corresponding alarm information will
be displayed on LCD.
When the controller detects that the oil pressure sensor is
open circuit and the action select "Warn", it will initiate a
warning alarm and the corresponding alarm information will
be displayed on LCD.
When the controller detects that the level sensor is open
circuit and the action select "Warn", it will initiate a warning
alarm and the corresponding alarm information will be
displayed on LCD.
If the flexible sensor set as temperature sensor, When the
controller detects that the temperature sensor is open circuit
and the action select "Warn", it will initiate a warning alarm
and the corresponding alarm information will be displayed on
LCD.
If the flexible sensor set as oil pressure sensor, When the
controller detects that the oil pressure sensor is open circuit
and the action select "Warn", it will initiate a warning alarm
2
and the corresponding alarm information will be displayed on
LCD.
If the flexible sensor set as level sensor, When the controller
detects that the level sensor is open circuit and the action
select "Warn", it will initiate a warning alarm and the
corresponding alarm information will be displayed on LCD.
When the controller detects that flexible sensor temperature
(sensor type: temperature sensor) has exceeded the pre-set
value while shutdown is prohibited, it will initiate a warning
alarm and the corresponding alarm information will be
displayed on LCD.
ISSUE 2013-08-28 Version 1.1 Page 14 of 41