Smartgen HGM410E User Manual page 15

No Items
Gen Over
9
Current
10 Fail To Start
Gen Over
11
Frequency
Gen Under
12
Frequency
13 Genset Failed
14 Low Fuel Level
Low Coolant
15
Level
Temp. Sensor
16
Open
Oil Pressure
17
Sensor Open
Level Sensor
18
Open
Temp. Sensor 2
19
Open
HGM400E Series Genset Controller
HGM400E Series Automatic Control Module
LCD.
When the controller detects that the genset current has
exceeded the pre-set value and delay is not 0, it will initiate a
shutdown alarm and the corresponding alarm information will
be displayed on LCD.
If the engine does not fire after the pre-set number of
attempts, it will initiate a shutdown alarm and the
corresponding alarm information will be displayed on LCD.
When the controller detects that the genset frequency has
exceeded the pre-set value, it will initiate a shutdown alarm
and the corresponding alarm information will be displayed on
LCD.
When the controller detects that the genset frequency has
fallen below the pre-set value, it will initiate a shutdown alarm
and the corresponding alarm information will be displayed on
LCD.
When the controller detects that the genset frequency is 0, it
will initiate a shutdown alarm and the corresponding alarm
information will be displayed on LCD.
When the controller detects that the fuel level has fallen
below the pre-set value or detects that the low fuel level input
is active, it will initiate a shutdown alarm and the
corresponding alarm information will be displayed on LCD.
When the controller detects the low coolant level input is
active, it will initiate a shutdown alarm and the corresponding
alarm information will be displayed on LCD.
When the controller detects that the temperature sensor is
open circuit and the action select "Shutdown", it will initiate a
shutdown alarm and the corresponding alarm information will
be displayed on LCD.
When the controller detects that the oil pressure sensor is
open circuit and the action select "Shutdown", it will initiate a
shutdown alarm and the corresponding alarm information will
be displayed on LCD.
When the controller detects that the level sensor is open
circuit and the action select "Shutdown", it will initiate a
shutdown alarm and the corresponding alarm information will
be displayed on LCD.
If the flexible sensor set as temperature sensor, When the
controller detects that the temperature sensor is open circuit
and the action select "Shutdown", it will initiate a shutdown
alarm and the corresponding alarm information will be
displayed on LCD.
ISSUE 2013-08-28
Description
Version 1.1 Page 16 of 41