Screen Snapshot (Optional-Purchase Sd Cards Only); Ais (Optional-Purchase Ais Equipment Only) - Humminbird 1158c Combo Installation And Operation Manual

Screen Snapshot activates the screen snapshot function. When Screen Snapshot is enabled,
pressing the MARK key creates a saved screen snapshot on the optional-purchase SD card
installed in your unit's card slot. All active menus, dialog boxes, warnings and messages are
captured and saved automatically.
NOTE: For more information, see Snapshot and Recording View and Snapshot and Recording
X-Press™ Menu.
NOTE: You must have an optional-purchase SD card installed for the Screen Snapshot feature to work.
NOTE: If you use your SD card in two different Fishfinder units that have different screen sizes, the
recordings made on one unit will still be present on the card, but they will be represented by the
Unavailable icon (circle with a slanted line through it) on the Snapshot and Recording View on the other
unit.
Your Fishing system is compatible with AIS technology. This equipment must be purchased
separately and connected properly to the control head for AIS to be activated in your Fishing
System.
When an AIS is connected to the Fishing System, AIS will appear as a menu option in the
Accessories Menu Tab. AIS allows you to locate and monitor other vessels, or Targets, within
range of the VHF signal. The AIS then exchanges information with those targets, including
vessel identification, position, course, and speed.
Screen Snapshot
(optional-purchase SD Cards only)
Settings: Off, On; Default = Off
AIS
(optional-purchase AIS equipment only)
Settings: Press the RIGHT Cursor key to activate.
Vessel Icons
Cargo Boat
Dredge Boat
Law Boat
Passenger Boat
Unidentified Boat
Sail Boat
Tow Boat
Tug Boat
199
Accessories Menu Tab