NMEA Output turns the NMEA* output on or off. NMEA Output should be turned On if you
connect the NMEA Output wires of the GPS Receiver cable to another NMEA-compatible
device, such as an autopilot.
*NMEA 0183 is a National Marine Electronics Association standard for data communication.
The following NMEA sentences are output:
DPT - Depth
MTW - Water Temperature
GLL - Lat/Lon Position
GGA - GPS Fix Data
RMC - Recommended Minimum Specific GNSS Data
VTG - Course Over Ground and Ground Speed
ZDA - Time and Date
When navigating, the following NMEA sentences are also output:
APB - Autopilot Sentence B
BWR - Bearing and Distance to Waypoint
RMB - Recommended Minimum Navigation Info
Sonar deactivates Sonar and removes the Sonar Views from the view rotation.
Demonstration controls whether the Demonstration Mode is visible or off. The Demonstration
Mode appears on the screen if you don't press any keys during the warning screen at power up.
Menu settings cannot be saved in Demonstration (see Power On the Control Head and
Start-Up Options Menu).
Video Out allows you to set the video format that will be sent to your remote monitor.
Setup Menu Tab
NMEA Output
(Advanced)
Settings: Off, On; Default = Off
Sonar
Settings: Off, On, Default = On
Demonstration
Settings: Off, Visible; Default = Visible
Video Out
Settings: Domestic Models: NTSC, Off; International Models: NTSC, PAL,
PAL M, Off; Default = Off
196