Waypoint [Name] (Most Recently-Created Waypoint) - Humminbird 1158c Combo Installation And Operation Manual
Hide thumbs
Also See for 1158c Combo:
- Operation manual (195 pages) ,
- Product manual (232 pages) ,
- Operation manual (203 pages)
Table of Contents
Advertisement
Waypoint [Name] allows you to view the waypoints submenu for the most recently created
waypoint. You must have pressed the MARK key at least once since you last powered up the
Fishfinder for this menu option to appear.
NOTE: See Introduction to Navigation for more information.
The Waypoint Submenu contains the following menu options:
Edit allows you to edit the Name, Position (Latitude and Longitude), and select the Icon
that will be used to represent the waypoint in the Chart and Combo Views.
Delete allows you to delete a waypoint from the saved waypoints list.
Go To allows you to select a waypoint and start navigation toward that waypoint, or add
that waypoint to the end of the current route.
Target allows you to apply a target to a waypoint selected from the saved waypoints list.
Grid allows you to apply a trolling grid to a waypoint selected from the saved waypoints
list.
Waypoint [Name]
(Most recently-created waypoint)
Settings: Edit, Delete, Go To, Target, Grid
153
Navigation X-Press™ Menu
- Quick Links:
- Installation Overview
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 1158c Combo and is the answer not in the manual?
Questions and answers
How to record sonar readings onto an SD card?
To record sonar readings on an SD card using the Humminbird 1158c Combo, follow these steps:
1. Install an SD Memory Card: Ensure that an optional-purchase SD memory card is installed in the slot of the device.
2. Access the Main Menu: Press the MENU key twice to open the Main Menu.
3. Navigate to the Navigation Tab: Use the RIGHT Cursor key to select the Navigation tab.
4. Export Navigation Data: Highlight "Export All Nav Data" and press the RIGHT Cursor key. A confirmation dialog box will appear.
5. Confirm Export: Press the RIGHT Cursor key again to confirm the export. If you want to cancel the export, press the LEFT Cursor key.
Note: If no SD memory card is installed, an error message will be displayed. Insert the SD memory card and try again.
This answer is automatically generated